1. To use the machine for copying, enter your code, which you can obtain
from your group's Administrative Assistant or your PI, and proceed with copying
in a usual way.

Please, do not forget to logout after you are done with copying!
You can log out by either of the following methods:

a. press the "Accounting" button in the top right corner of the "Copy" menu, and then "logout";

b. press the yellow "Clear All" button on the copier monitor
and choose "Logout and confirm".

Once again, please make sure you are logged out before you leave the copier.

2. While printing, if you get an error which says “invalid id”,
please install the latest driver for the copier/printer machine.

The printer must be installed through the cups server run by TIG.
Instructions on how to do this can be found on the TIG website.
Do not connect to the copier directly.

Instructions for printing to our machines:
-for Macs
-for Windows XP
-for Windows Vista

3. If you started having problems while printing from SAP after accounting
was enabled please contact us via ops@csail.mit.edu.

If you have any questions or concerns, please let us know by
emailing ops@csail.mit.edu


--- This topic: TIG > WebHome > PrintingTopics > CopiersAccounting
Topic revision: 02 Jun 2018, JasonDorfman
This site is powered by Foswiki MIT: Massachusetts Institute of Technology