You are here: Foswiki>Ops Web>LaserCutter (17 Mar 2010, AnthonyZolnik)EditAttach

Laser Cutter

CSAIL has a Universal 120W Laser Cutter available to any CSAIL member providing you meet the following criteria:
  • 1. you have passed the training course for the laser cutter and machine shop
  • 2. you are using it for CSAIL related research
  • 3. you are on the csail-lasercutter mailing list.

Location:

The machine in located in 32-242 (after you complete the training you will be provided with the combination to the room).

Training:

To sign up for the training course, please contact Ron Wiken (ron@csail.mit.edu) to arrange a time to take the course - it runs approximately thirty minutes. This machine can handle stock up to 32 inches x 18 inches.

Clean Up:

Prior to starting a job, it is the user's responsibility to inspect both the mirror and the lens of the laser cutter. If dirty, please make sure to clean as needed. Only use the supplies (Q-tips, lens paper, and solution) near the laser cutter. All of this will be covered in the training session.

Remember, this is a shared resource so it is critical that anyone using it contributes to the cleanliness and organization of the room.

What to Avoid:

  • Do not put pvc in the laser cutter under any circumstances. It creates poisonous gas and will ruin the machine.

  • Lending someone not trained on this machine your credentials will result in removal from the ability to use the machine.

-- AnthonyZolnik - 17 Mar 2010
Topic revision: 17 Mar 2010, AnthonyZolnik
 

MIT Computer Science and Artificial Intelligence Laboratory

 

  • About CSAIL
  • Research
  • News + Events
  • Resources
  • People

This site is powered by Foswiki MIT: Massachusetts Institute of Technology