We removed the two 52 inch plasma displays in the Bleil Room (32-601)and replaced them with a 1080p Mitsubish WD2000 DLP 92 inch rear projection system.

How to Use this Room*:

1. Power on the projector by pressing the appropriate button on the remote control located by the printer.

2. Plug your laptop into either of the pop up panels in the conference table. Input #1 is at the far end of the room and Input #2 is closer to the screen.

3. Please be sure to power off the projector when leaving the room and remember to place the remote back on its charging base.

* Use of the Bleil Board Room is at the discretion of the CSAIL Director. Please contact the Director's Office at events@csail.mit.edu for more information.

-- AnthonyZolnik - 30 Jul 2010

  • Bleil Board Room Table Pop-up:

--- This topic: Ops > WebHome > Bleil
Topic revision: 12 Feb 2018, VictoriaPalay
This site is powered by Foswiki MIT: Massachusetts Institute of Technology