Facilities
Oops provides these following services to its CSAIL members.
Laser Cutter/Printer
|
Information
- Room:
- Phone Number:
- Saftey:
- You must take Ron Wiken's saftey/basic maintainence and operating instruction course prior to using the laser. This takes about thirty (30) minutes.
- You cannot cut PVC because it will ruin the laser and will cause poisonous chlorine gas to form.
- Do's:
- You MAY cut wood, most plastics (no pvc), rubber, leather, paper.
- You MAY etch glass and stone.
- Dont's:
- You MAY NOT etch or cut metal.
- You MAY NOT cut or etch PVC.
- You MAY NOT change any settings
- Problems: ops@csail.mit.edu or ron@csail.mit.edu
|
Metal Workshop
|
Information
- Room: 244
- Phone Number: 3-2078
- Saftey:
- You must see Ron Wiken for basic saftey and instructions. This can take about one (1) hour.
- You MUST wear eye protection.
- Rules:
- You must clean up after yourself. This means put away your tools when finished, pickup any debris formed from you project, and report missing/broken tools to Ron Wiken.
- DO NOT remove any tools from the machine shop. You may borrow tools from the CSAIL stock room if you need them.
- Problems: ops@csail.mit.edu or ron@csail.mit.edu
|
Spare Parts
|
Information
- Room: 240
- Phone Number: 3-5991
- Rules:
- Only take what you need for your project.
- DO NOT take any drawers out of the room.
- If you spill something, pick it up.
- If you borrow tools, you must bring them back.
- If you cannot find something, ask Ron Wiken.
- Hours of operation: 24/7
- Problems: ops@csail.mit.edu or ron@csail.mit.edu
|
